Ubiquiti airMAX NanoBeam AC Gen2 5GHz 19dBi Outdoor Wireless Bridge (NBE-5AC-GEN2)

The Ubiquiti NanoBeam AC Gen2 (NBE-5AC-GEN2) is a high-performance, compact outdoor wireless bridge engineered to deliver maximum throughput within a small physical footprint. Operating on the cleaner 5GHz frequency band, this Customer Premises Equipment (CPE) device achieves over 450 Mbps of real TCP/IP data throughput. It features an integrated 19dBi dual-linear polarised dish antenna that utilises Ubiquiti's InnerFeed technology, integrating the radio directly into the feedhorn to eliminate insertion cable losses. Driven by the proprietary airMAX ac TDMA engine, the NanoBeam Gen2 filters out crowded local RF noise, providing stable, low-latency Point-to-Point (PtP) and Point-to-Multipoint (PtMP) links spanning up to 15 kilometres.

Key Features

• InnerFeed Antenna Technology: Combines the radio engine and the high-gain 19dBi dish antenna into a single unified chassis, cutting out RF cable attenuation losses for optimal signal efficiency.

• Dedicated Management Wi-Fi Radio: Features a secondary, internal 2.4GHz Wi-Fi subsystem allowing installers to configure and tune the device instantly via a mobile application without physical cable connections.

• Advanced Noise Immunity: Concentrates RF energy into a significantly tighter beamwidth, allowing the device to spatially block adjacent channel interference in dense wireless environments.

• Dual Gigabit Ethernet Interfaces: Outfitted with twin 10/100/1000 Mbps RJ45 ports to prevent physical data backhaul restrictions and accommodate auxiliary connections.

• Three-Axis Ball Joint Mount: Supplied with a versatile 3-axis articulation assembly, allowing precise directional adjustment and alignment along a pole or wall surface.

Technical Specifications

• Manufacturer Part Code (MPN): NBE-5AC-GEN2

• Product Type: Outdoor airMAX ac Wireless Bridge / CPE

• Processor Architecture: Atheros MIPS 74Kc (720 MHz)

• Memory & Storage: 128 MB DDR2, 8 MB Flash

• Networking Interface: 2 x 10/100/1000 Mbps RJ45 Ports

• Management Interface: Dedicated 2.4GHz Setup Wi-Fi Radio

• Operating Frequency: 5150–5875 MHz (5GHz)

• Antenna Gain: 19 dBi

• Polarisation: Dual Linear

• Channel Width Support: 10/20/30/40/50/60/80 MHz (PtP) | 10/20/30/40 MHz (PtMP)

• Maximum Power Consumption: 8.5W

• Power Supply: 24V, 0.5A Gigabit PoE Adapter (Included)

• Power Method: 2-Pair Passive PoE (Pins 4, 5+; 7, 8 Return)

• ESD/EMP Protection: Air and Contact: ± 24kV

• Enclosure Characteristics: Outdoor UV-Stabilised Plastic

• Operating Temperature: -40°C to 80°C

• Certifications: CE, FCC, IC, RoHS, NDAA Compliant

What's in the Box?

• 1 x Ubiquiti NanoBeam 5AC Gen2 Device

• 1 x Ball Joint Pole-Mounting Kit

• 1 x Locking Ring

• 1 x Metal Mounting Strap

• 1 x 24V, 0.5A Gigabit PoE Injector with Bracket

• 1 x UK Power Cord (Grounded 3-pin)